Questions? Need Help? 1-928-951-8332

Hay Moisture Detectors

  • Moister Tester Value Package
    • 2% less

    Moister Tester Value Package

    Not rated yet

    Low-Range Hay Moisture Detector Value Package for 6-30 % range including Meter, two batteries and number 1235 Probe.

    This resistance type moisture detector is designed for testing moisture content in hay and/or straw. It tells when hay is properly dry for baling by direct reading of moisture content on analog dial. Rugged, compact, comfortable in the hand, and portable, the F-6 is easy to use.

    The meter may be used with the Short Pin Prod which threads directly onto the instrument making a handy self-contained unit. For testing high density bales, hay in mows, stacks, windrows or piles, the 10" prod is used with the H-3 handle which attaches to the meter. Probe is insulated except for two contact bands at the tip--only the hay at the contact point is measured.

    Hand-held unit measures 17- 1/2" long. Powered by two 9V batteries, it is accurate within 2% at 20% range. Solid state circuit. One year limited warranty. Wt. 1.5 lbs.

    • $350.99
  • Hay Moisture Detector Deluxe Package
    • 2% less

    Hay Moisture Detector Deluxe Package

    Not rated yet

    Low-Range Hay Moisture Detector Deluxe Package includes not only the F-6 Meter shown, but also a short pin prod, a 10" prod, a H-3 handle, and a carrying case.

    This resistance type moisture detector is designed for testing moisture content in hay and/or straw. It tells when hay is properly dry for baling by direct reading of moisture content on analog dial. Rugged, compact, comfortable in the hand, and portable, the F-6 is easy to use.

    The meter may be used with the Short Pin Prod which threads directly onto the instrument making a handy self-contained unit. For testing high density bales, hay in mows, stacks, windrows or piles, the 10" prod is used with the H-3 handle which attaches to the meter. Probe is insulated except for two contact bands at the tip--only the hay at the contact point is measured.

    Hand-held unit measures 7 1/2" long. Powered by two 9V batteries, it is accurate within 2% at 20% range. Solid state circuit. One year limited warranty.

    • $466.07
  • Hay Moisture Detector Deluxe Package
    • 2% less

    Hay Moisture Detector Deluxe Package

    Not rated yet

    Hay Moisture Detector Deluxe Package includes not only the F-6 Meter shown, but also a short pin prod, a 10" prod, a H-3 handle, and a carrying case.

    This resistance type moisture detector is designed for testing moisture content in hay and/or straw. It tells when hay is properly dry for baling by direct reading of moisture content on analog dial. Rugged, compact, comfortable in the hand, and portable, the F-6 is easy to use.

    The meter may be used with the Short Pin Prod which threads directly onto the instrument making a handy self-contained unit. For testing high density bales, hay in mows, stacks, windrows or piles, the 10" prod is used with the H-3 handle which attaches to the meter. Probe is insulated except for two contact bands at the tip--only the hay at the contact point is measured.

    Hand-held unit measures 7 1/2" long. Powered by two 9V batteries, it is accurate within 2% at 20% range. Solid state circuit. One year limited warranty.

    • $466.07
  • Hay Baler Moisture Detector Deluxe Package
    • 2% less

    Hay Baler Moisture Detector Deluxe Package

    Not rated yet

    Ensure quality hay and save production time by reading moisture content during baling—without leaving the cab! The deluxe model FX-2000 baler moisture meter features a newly designed functional case which fits the hand more comfortably. The electrode sensor takes two readings every second and displays Average and Highest of eight accumulated readings on the backlighted digital read-out display--after 8 readings have been taken, the meter will begin a new “read” cycle. Placement of the 1986 Sensor depends on baler model and operator preference, but suggested locations are indicated in instructions.

    FX-2000 displays moisture content percentage over the range of 6% to 40% and gives a clear indication of "under range" and "over range". An audible set-point even alerts the operator when a pre-selected percent of moisture content has been reached. The connection to the vehicle"s 12 Volt power source is circuit protected, and convenient inside-the-cab mounting clip for the meter provides hands-free reading. Package comes complete with FX-2000 Meter, H-3 Handle, 830-2 10" Prod, 831 Short Pin Prod, 1986 Sensor, and 2498 Carrying Case. Three year limited warranty. Wt. 4-1/2 lbs.

    • $805.56
  • Grain Moisture Detector
    • 2% less

    Grain Moisture Detector

    Not rated yet
    The Grain Moisture Detector is now improved with a powerful micro-controller circuit for increased data processing capabilities. Accurate information about moisture content is critical for optimal harvesting and marketing and for cost-effective use of ventilating and grain-drying equipment. Sample cup is filled with grain sample (three or four grams is sufficient). Electrode handle is turned and tightened down until data appear in the readout. No additional equipment, such as a scale or grinder, is necessary for grain testing, but optional accessories may be added for checking moisture in hay or where a small sampling is not feasible. The G-7 may be calibrated for many different crops of grain, seed, beans, corn or rice and will store up to 150 accumulated readings in user-defined batches by grain. It may be set for automatic or manual temperature correction. The display will show average and highest readings, standard deviation and co-efficient of variance of stored readings. A built-in calibration check assures accuracy and reliability. The G-7 has a moisture range of 6% to 40% and is powered by one 9-Volt Alkaline battery. The unit is a compact 7-1/4" by 5-1/2". One year Warranty. Wt. 5 lbs.
    • $609.92