Equestrian Automatic Horse Stall Waterer - premium quality for your equestrian center or facility! Heated or non-heated available. Wide selection at Farm & Ranch Depot.  Custom Colors available for your luxury equestrian barn or stable. On sale now!

Heated Electric Box Stall Drinker from Pride of the Farm!  Performance One Poly Drinkers. Super Insulated. As Versatile as You Can Get! BUY NOW at Farm & Ranch Depot! Perfect for corner installations but can be installed outdoors as well.

6 Gallon capacity waterer for Horses, Calves, Wildlife With Performance One Model WPO6E Heated Utility Drinker For Stalls, Corrals and Paddocks.

AS VERSATILE AS YOU CAN GET. Water horses, calves, wildlife with Performance One model WP06. For stalls, corrals and paddocks. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Simple water level adjustment, easy to clean. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection. Easy access to valve and heater. Drinker is very easy to clean--no disassembly for cleaning required. Large 2” External AND Internal (5.1 cm) clean out drains.

Optional heater, 250 watts, 110 volts. We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C). No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Four recessed anchor notches for secure installation.

The bottom has a cavity for warm climate installations only. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad. The cavity can be used to make the connection from the supply line to our valve.

PERFORMANCE ONE E-DRINK

Electrically Heated *Energy Efficient You Only Need One Unit To Water Up To 150 Head Of Most Any Species

A typical winter heating bill —$10.00 or less! Why? Two reasons. Our drinker has 17 gallons of capacity. Incoming water carries heat energy. The more water, the more heat. Our R-valve of 7.5 per inch holds the heat provided by incoming water. Second, our supply line is in the water.You don’t need extra heat to keep the line above the ground open.You do need proper installation to prevent the supply line underneath
the drinker from freezing.

Two large drink openings 8” x 14” each. Drinker wells are 14” deep allowing most any animal to drink naturally. 100% poly construction. Molded with the most effective ultraviolet inhibitor. Tough enough for years of
outdoor use. Notched flanges for easy anchoring. Two 2 inch side drains and 1 threaded bottom port for optional inside drain. Stainless steel spring loaded valve cover removes easily. No loose parts to lose. Over 300 square inches of access for easy hook up.

THE KNIGHT ENERGY EFFICIENT - HANDSOME - PERFECT FOR EXISTING DRINKER REPLACEMENT OR NEW INSTALLATIONS

Check mate! Great value and great features don't have to come in a boring, boxy profile. Model WPO12 is loaded and is also one of the better looking drinkers ever to reach the market.  

• Dependable, non-siphoning Durapride valve. (30 years of use) A typical annual heating bill with Model WPO12 might be somewhat higher than with Model WPO17 — maybe $15.00 instead of $10.00! Model WPO12 has the same foam filled double wall construction. Also, our patented ports on the sidewall of the valve cover allow heat dispersal from underneath the valve cover into the drink openings.  
• Proven (20 years of use) 250 watt heater
• Two inch built-in drain
• Overflow port can be used either as an internal drain or it can be used for optional continuous flow operation.
• Rugged notches for secure anchoring.
• Spring loaded pin allows easy removal of access panel. It takes a quarter turn with a straight edge screwdriver. Lower access opening is 6 inches x 19 inches.

70 Gallon Open Trough Tank offers more features. More drinking length. More gallons

Pride of the Farm's trough drinker is a favorite for feedyards, pastures and dairies. It has 70 inches of drinking length and holds 70 gallons. It is loaded with features not available on any competing trough drinker. Extra supply line protection, patented water circulation, multiple constant flow and drain options. Grade A compliant. Backed with the strongest warranty available.

Water circulation is assisted with our patented baffle design and discharge ports. Warmer water pushes through the ports and cooler water returns under the baffle.

Feature Include:

-Recessed, protected notches for anchoring. Our 8 notches do not protrude where they can be hit. Concrete stud lags included.

-High flow valve. Float is easily adjustable for varying water levels.

-Spring loaded pin allows access panel to pop off with the twist of a screwdriver. There are no loose parts.

-Lower access panels on each end. Each opening is 5" x 9".

-Superb supply line protection. Water supply line enters through our unique tower. The tower is foamed filled and the surrounding wall and valve cover are foam filled.

-Shutoff valve, 3/4" is standard.

-Trough slopes to drain. Two drain options. You can drain through a 3 inch opening with a mechanical plug. There also is a 3 inch opening at the bottom of the tower which permits drainage through a tile line to a lagoon.

-Constant flow at 70 gallons and at 45 gallons.

-Valve and Heater - 18 month unconditional warranty.Other components 5 years unconditional warranty and an additional 6 year pro-rated warranty.

250 Watt, 110 volt heater. Typical heating cost for one heating season only $10!

AS VERSATILE AS YOU CAN GET. Water horses, calves, wildlife with Performance One model WP06. For stalls, corrals and paddocks. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Simple water level adjustment, easy to clean. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection. Easy access to valve and heater. Drinker is very easy to clean--no disassembly for cleaning required. Large 2” External AND Internal (5.1 cm) clean out drains.

Optional heater, 250 watts, 110 volts. We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C). No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Four recessed anchor notches for secure installation.

The bottom has a cavity for warm climate installations only. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad. The cavity can be used to make the connection from the supply line to our valve.

Optional anchor package for Performance One drinkers.

Performance One OPEN TROUGH TANK - 50 Gallon - 34" Drink Length - 200 Beef/100 Dairy - MADE IN THE USA!! Buy yours at Farm & Ranch Depot!  We carry many drinking solutions for large-scale feeding operations, livestock and wildlife management programs.

Brower 6 Gallon capacity waterer for Horses, Calves, Wildlife With Performance One Model MPO6E Heated Utility Drinker For Stalls, Corrals and Paddocks.

AS VERSATILE AS YOU CAN GET. Water horses, calves, wildlife with Performance One model WP06. For stalls, corrals and paddocks. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Simple water level adjustment, easy to clean. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection. Easy access to valve and heater. Drinker is very easy to clean--no disassembly for cleaning required. Large 2” External AND Internal (5.1 cm) clean out drains.

Optional heater, 250 watts, 110 volts. We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C). No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Four recessed anchor notches for secure installation.

The bottom has a cavity for warm climate installations only. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad. The cavity can be used to make the connection from the supply line to our valve.