INTERNATIONAL ORDERS: Please choose "Freight" at checkout. We will get a quote and upon approval we will send an Online Invoice to complete payment.

Heated Utility Drinker

Not rated yet
0

6 Gallon capacity waterer for Horses, Calves, Wildlife With Performance One Model WPO6E Heated Utility Drinker For Stalls, Corrals and Paddocks.

AS VERSATILE AS YOU CAN GET. Water horses, calves, wildlife with Performance One model WP06. For stalls, corrals and paddocks. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Simple water level adjustment, easy to clean. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection. Easy access to valve and heater. Drinker is very easy to clean--no disassembly for cleaning required. Large 2” External AND Internal (5.1 cm) clean out drains.

Optional heater, 250 watts, 110 volts. We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C). No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Four recessed anchor notches for secure installation.

The bottom has a cavity for warm climate installations only. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad. The cavity can be used to make the connection from the supply line to our valve.

  • $389.00
Qty:  
OR

6 Gallon capacity waterer for Horses, Calves, Wildlife With Performance One Model WPO6E Heated Utility Drinker For Stalls, Corrals and Paddocks.

AS VERSATILE AS YOU CAN GET. Water horses, calves, wildlife with Performance One model WP06. For stalls, corrals and paddocks. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Simple water level adjustment, easy to clean. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection. Easy access to valve and heater. Drinker is very easy to clean--no disassembly for cleaning required. Large 2” External AND Internal (5.1 cm) clean out drains.

Optional heater, 250 watts, 110 volts. We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C). No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Four recessed anchor notches for secure installation.

The bottom has a cavity for warm climate installations only. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad. The cavity can be used to make the connection from the supply line to our valve.

    • Weight
      31 lbs
    • SKU
      WPO6E
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review