BM5 Hydraulic Magneto Motor: 6.1 CID, 1 1/4" Straight Parallel Key Shaft, 725 PSI, Standard SAE 10 Ports

The BM5 series hydraulic motor is a large volume, disc valve, high-pressure motor with a radial ball-bearing design that can maintain a more significant load. The BM5S is a short motor design without bearings for gearbox assembly applications.

The BM5 hydraulic motor is a high-pressure, large-volume disc valve motor with a radial bearing design that can support heavier loads. Its advanced disc valve enhances flow distribution performance at low speeds. The valve can automatically compensate for wear, increasing volumetric efficiency. Double-taper roller bearings allow the motor to handle high radial loads. These motors are suitable for heavier vehicles in traction drive applications. This Hydro Custom BM5 Motor, rated at 6 GPM, 193 RPM, and 725 PSI has a 6.1 in3 displacement and 464.7 lbs-in torque.

Compact, lightweight design with spool and gerolor gearset for high power density
The optimal operating condition is 1/3 to 2/3 of the continuous use values.
Smooth and precise speed control for reliable operation
Standard shaft seals rated at 1,085 PSI standard, 2900 PSI HPSS
Standard shaft seals and bearings are not recommended for applications that may experience side-loadings.
Optimized efficiency for medium-load, continuous-duty applications
Case drain capability to protect seals and extend motor life
The BM5 and BM5W series do not have internal check valves
Standard clockwise rotation (facing shaft) when port A is pressurized
Full BM5 Specifications

Radial Shaft Load: 1763 lbs. (800 kg)
Axial Shaft Load: 881 lbs. (400 kg)
Shaft Seal Rating: 1,085 PSI standard, 2900 PSI HPSS
Rotation: Bi-rotational, clockwise preferred
Temperature Rating: 100-120°F working, 176°F (80°C) max
Port Configuration: Staggered
Case Drain: SAE 4

Specifications:

Brand:  Hydro Custom
Weight:  23.10 LBS
PSI:  725
Port Size:  SAE 10
CID:  6.1
GPM:  6
Inlet Port:  SAE 10
Outlet Port:  SAE 10
Length in Inches:  L - 0.73, L3: 7.22
Mounting:  Magneto, SAE A 6-bolt
RPM:  193
Shaft:  1 1/4" Straight Parallel Key
Torque:  464.7

Warranty: 1 Year Limited