BM6 Hydraulic Motor: 24.1 CID, 1 1/2” X 57mm Straight Parallel Key Shaft, 725 PSI, Internal Drain Style SAE 16 Ports

The BM6 is a robust disc valve motor with radial ball-bearing design for high pressure and torque. It features disc distribution flow for low-speed performance and high volumetric efficiency. Ideal for heavy vehicles in traction drive applications.

The BM6 hydraulic motor is a large-volume disc valve motor featuring a radial ball-bearing design that can tolerate higher loads. This motor is ideal for high-pressure applications, providing greater maximum torque than our BM5 series. Its advanced disc flow distribution improves performance at low speeds. The valve can automatically adjust for wear, increasing volumetric efficiency. Double-taper roller bearings allow the motor to handle high radial loads. These motors are ideal for heavier vehicles in traction drive applications. This Hydro Custom BM6 Motor, rated at 24 GPM, 195 RPM, and 725 PSI has a 24.1 in3 displacement and 1835.7 lbs-in torque.

Compact, lightweight design with spool and gerolor gearset for high power density
The optimal operating condition is 1/3 to 2/3 of the continuous use values.
Smooth and precise speed control for reliable operation
Standard shaft seals rated at 1,085 PSI standard, 2900 PSI HPSS
Standard shaft seals and bearings are not recommended for applications that may experience side-loadings.
Case drain capability to protect seals and extend motor life
Internal check valves are included for smoother directional control.
Standard clockwise rotation (facing shaft) when port A is pressurized
Full BM6 Specifications

Mounting Flange: Square, SAE-C 4-Bolt
Radial Shaft Load: 4,629 lbs. (2,100 kg)
Axial Shaft Load: 1763 lbs. (800 kg)
Shaft Seal Rating: 1,085 PSI standard, 2900 PSI HPSS
Rotation: Bi-rotational, clockwise preferred
Temperature Rating: 100-120°F working, 176°F (80°C) max
Port Configuration: Staggered
Port Size: Port Size: SAE 16
Case Drain: SAE 4

Specifications:

Brand:  Hydro Custom
Weight:  60.50 LBS
PSI:  725
Port Size:  SAE 16
CID:  24.1
GPM:  24
Inlet Port:  SAE-16
Outlet Port:  SAE-16
Length in Inches:  11.02
Mounting:  SAE C 4 bolt, Square
RPM:  195
Shaft:  1 1/2” X 57mm Straight Parallel Key
Torque:  1835.7

Warranty: 1 Year Limited