Customer Reviews

Heated Utility Drinker - 6 Gallons - Brower

Not rated yet
0

Brower 6 Gallon capacity waterer for Horses, Calves, Wildlife With Performance One Model MPO6E Heated Utility Drinker For Stalls, Corrals and Paddocks.

AS VERSATILE AS YOU CAN GET. Water horses, calves, wildlife with Performance One model WP06. For stalls, corrals and paddocks. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Simple water level adjustment, easy to clean. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection. Easy access to valve and heater. Drinker is very easy to clean--no disassembly for cleaning required. Large 2” External AND Internal (5.1 cm) clean out drains.

Optional heater, 250 watts, 110 volts. We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C). No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Four recessed anchor notches for secure installation.

The bottom has a cavity for warm climate installations only. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad. The cavity can be used to make the connection from the supply line to our valve.

  • $525.00
Qty:  

Brower 6 Gallon capacity waterer for Horses, Calves, and Wildlife With Performance One Model MPO6E Heated Utility Drinker For Stalls, Corrals and Paddocks. Can handle up to 25 horses, 40 ponies, 100 calves, or 100 goats.

AS VERSATILE AS YOU CAN GET. Water horses, calves, wildlife with Performance One model WP06. For stalls, corrals and paddocks. Our VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. Simple water level adjustment, easy to clean. Double wall, single piece poly construction--ALL SMOOTH! Foam filled insulation--R value of 7.5 per inch which offers lots of freeze protection. Easy access to valve and heater. Drinker is very easy to clean--no disassembly for cleaning required. Large 2” External AND Internal (5.1 cm) clean out drains.

Heater is 250 watts, 110 volts. We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C). No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less than $10.00 per heating season. Four recessed anchor notches for secure installation.

The bottom has a cavity for warm climate installations only. Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad. The cavity can be used to make the connection from the supply line to our valve.

    • Weight
      42 lbs
    • SKU
      MPO6E

Product questions

  • jim suddarth
    Nov 17, 2024, 20:27

    what type of heating element is used in the unit please provide a phone no I can call. thanks

    Administrator
    Nov 18, 2024, 07:58

    Thank you for your interest in our products. Please see the catalog and the instruction manual for the MP06E - 6 Gallon Utility Drinker.  I have sent the information to the email you provided, on the elements, including the heating element in the unit.  Please let me know if you have any questions.