Ten Gallon Energy Free Automatic Waterer

POLAR-MAX® DRINKERS 100% ENERGY FREE

Simple Installation - can be fitted on existing pads; no heat well needed.
Attractive Design - you'll be proud to have these units in your operation.
Animal Friendly Flaps - no ball or float closures to ice.
Nature's ground water temperature does this job. POLAR-MAX® DRINKERS operate like thermos all year long.

Loaded with these PRIDE OF THE FARM® quality features:
1. Stainless steel bolts and removable top afford easy access to plumbing. Optional wing bolts (Model OF403WB) are available for
grade A inspections.
2. Unique baffles guard against icing and keep valve operating under severest conditions.
3. Notched flanges for easy anchoring.
4. Achieve a quality installation with PRIDE OF THE FARM® anchor package. Order Model 383344 which contains 4 anchor bolts, 4 flat washers, 4 plates and 4 nuts, all stainless steel.
5. Weather strip and an insulated sleeve for the supply line come with each unit.
6. Simple installation - no heat well needed; use an 8-12 inch tile; can be fitted on most existing pads.
7. Sealed bottom keeps out moisture and rodents.
8. Two 2-inch drain holes for fast clean out.
9. Foam insulation between walls has an R-value of 7.14 inch.
10. Double wall DURAROCK® construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.
11. Seamless sidewall cannot leak.
12. Tolerance to water level - you don't have to worry about summer and winter water levels. (If the water level is too high on a ball or float type closure, closures can stick).
13. Dependable, non siphoning valve - proven and trouble free.
14. Animal friendly insulated flaps. Livestock can drink out of both flaps at the same time - not always so with a ball closure. No pulleys and cables to foul and rust.

Read Why Our Flap Is Better

WPM10A similar to WPM10 but with cattle flaps

Ten Gallon Energy Free Automatic Waterer

POLAR-MAX® DRINKERS 100% ENERGY FREE

Simple Installation - can be fitted on existing pads; no heat well needed.
Attractive Design - you'll be proud to have these units in your operation.
Animal Friendly Flaps - no ball or float closures to ice.
Nature's ground water temperature does this job. POLAR-MAX® DRINKERS operate like thermos all year long.

Loaded with these PRIDE OF THE FARM® quality features:
1. Stainless steel bolts and removable top afford easy access to plumbing. Optional wing bolts (Model OF403WB) are available for
grade A inspections.
2. Unique baffles guard against icing and keep valve operating under severest conditions.
3. Notched flanges for easy anchoring.
4. Achieve a quality installation with PRIDE OF THE FARM® anchor package. Order Model 383344 which contains 4 anchor bolts, 4 flat washers, 4 plates and 4 nuts, all stainless steel.
5. Weather strip and an insulated sleeve for the supply line come with each unit.
6. Simple installation - no heat well needed; use an 8-12 inch tile; can be fitted on most existing pads.
7. Sealed bottom keeps out moisture and rodents.
8. Two 2-inch drain holes for fast clean out.
9. Foam insulation between walls has an R-value of 7.14 inch.
10. Double wall DURAROCK® construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.
11. Seamless sidewall cannot leak.
12. Tolerance to water level - you don't have to worry about summer and winter water levels. (If the water level is too high on a ball or float type closure, closures can stick).
13. Dependable, non siphoning valve - proven and trouble free.
14. Animal friendly insulated flaps. Livestock can drink out of both flaps at the same time - not always so with a ball closure. No pulleys and cables to foul and rust.

(Product is considered oversized for shipping.  Dimensional weight is 87 lbs.) 

WPM10A similar to WPM10 but with cattle flaps.

Twenty Gallon Energy Free Automatic Waterer

POLAR-MAX® DRINKERS 100% ENERGY FREE

Simple Installation - can be fitted on existing pads; no heat well needed.
Attractive Design - you'll be proud to have these units in your operation.
Animal Friendly Flaps - no ball or float closures to ice.
Nature's ground water temperature does this job. POLAR-MAX® DRINKERS operate like thermos all year long.

Loaded with these PRIDE OF THE FARM® quality features:
1. Stainless steel bolts and removable top afford easy access to plumbing. Optional wing bolts (Model OF403WB) are available for
grade A inspections.
2. Unique baffles guard against icing and keep valve operating under severest conditions.
3. Notched flanges for easy anchoring.
4. Achieve a quality installation with PRIDE OF THE FARM® anchor package. Order Model 383344 which contains 4 anchor bolts, 4 flat washers, 4 plates and 4 nuts, all stainless steel.
5. Weather strip and an insulated sleeve for the supply line come with each unit.
6. Simple installation - no heat well needed; use an 8-12 inch tile; can be fitted on most existing pads.
7. Sealed bottom keeps out moisture and rodents.
8. Two 2-inch drain holes for fast clean out.
9. Foam insulation between walls has an R-value of 7.14 inch.
10. Double wall DURAROCK® construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.
11. Seamless sidewall cannot leak.
12. Tolerance to water level - you don't have to worry about summer and winter water levels. (If the water level is too high on a ball or float type closure, closures can stick).
13. Dependable, non siphoning valve - proven and trouble free.
14. Animal friendly insulated flaps. Livestock can drink out of both flaps at the same time - not always so with a ball closure. No pulleys and cables to foul and rust.

Read Why Our Flap Is Better

Fourteen Gallon Energy Free Automatic Waterer

POLAR-MAX® DRINKERS 100% ENERGY FREE

Simple Installation - can be fitted on existing pads; no heat well needed.
Attractive Design - you'll be proud to have these units in your operation.
Animal Friendly Flaps - no ball or float closures to ice.
Nature's ground water temperature does this job. POLAR-MAX® DRINKERS operate like thermos all year long.

Loaded with these PRIDE OF THE FARM® quality features:
1. Stainless steel bolts and removable top afford easy access to plumbing.
2. Unique baffles guard against icing and keep valve operating under severest conditions.
3. Notched flanges for easy anchoring.
4. Achieve a quality installation with PRIDE OF THE FARM® anchor package. Order Model 383344 which contains 4 anchor bolts, 4 flat washers, 4 plates and 4 nuts, all stainless steel.
5. Weather strip and an insulated sleeve for the supply line come with each unit.
6. Simple installation - no heat well needed; use an 8-12 inch tile; can be fitted on most existing pads.
7. Sealed bottom keeps out moisture and rodents.
8. Two 2-inch drain holes for fast clean out.
9. Foam insulation between walls has an R-value of 7.14 inch.
10. Double wall DURAROCK® construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.
11. Seamless sidewall cannot leak.
12. Tolerance to water level - you don't have to worry about summer and winter water levels. (If the water level is too high on a ball or float type closure, closures can stick).
13. Dependable, non siphoning valve - proven and trouble free.
14. Animal friendly insulated flaps. Livestock can drink out of both flaps at the same time - not always so with a ball closure. No pulleys and cables to foul and rust.

Read Why Our Flap Is Better

Fourteen Gallon Energy Free Automatic Waterer

POLAR-MAX® DRINKERS 100% ENERGY FREE

Simple Installation - can be fitted on existing pads; no heat well needed.
Attractive Design - you'll be proud to have these units in your operation.
Animal Friendly Flaps - no ball or float closures to ice.
Nature's ground water temperature does this job. POLAR-MAX® DRINKERS operate like thermos all year long.

Loaded with these PRIDE OF THE FARM® quality features:
1. Stainless steel bolts and removable top afford easy access to plumbing. Optional wing bolts (Model OF403WB) are available for
grade A inspections.
2. Unique baffles guard against icing and keep valve operating under severest conditions.
3. Notched flanges for easy anchoring.
4. Achieve a quality installation with PRIDE OF THE FARM® anchor package. Order Model 383344 which contains 4 anchor bolts, 4 flat washers, 4 plates and 4 nuts, all stainless steel.
5. Weather strip and an insulated sleeve for the supply line come with each unit.
6. Simple installation - no heat well needed; use an 8-12 inch tile; can be fitted on most existing pads.
7. Sealed bottom keeps out moisture and rodents.
8. Two 2-inch drain holes for fast clean out.
9. Foam insulation between walls has an R-value of 7.14 inch.
10. Double wall DURAROCK® construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.
11. Seamless sidewall cannot leak.
12. Tolerance to water level - you don't have to worry about summer and winter water levels. (If the water level is too high on a ball or float type closure, closures can stick).
13. Dependable, non siphoning valve - proven and trouble free.
14. Animal friendly insulated flaps. Livestock can drink out of both flaps at the same time - not always so with a ball closure. No pulleys and cables to foul and rust.

Sixteen Gallon Energy Free Drinker

POLAR-MAX® DRINKERS 100% ENERGY FREE

Simple Installation - can be fitted on existing pads; no heat well needed.
Attractive Design - you'll be proud to have these units in your operation.
Animal Friendly Flaps - no ball or float closures to ice.
Nature's ground water temperature does this job. POLAR-MAX® DRINKERS operate like thermos all year long.

Loaded with these PRIDE OF THE FARM® quality features:
1. Stainless steel bolts and removable top afford easy access to plumbing. Optional wing bolts (Model OF403WB) are available for
grade A inspections.
2. Unique baffles guard against icing and keep valve operating under severest conditions.
3. Notched flanges for easy anchoring.
4. Achieve a quality installation with PRIDE OF THE FARM® anchor package. Order Model 383344 which contains 4 anchor bolts, 4 flat washers, 4 plates and 4 nuts, all stainless steel.
5. Weather strip and an insulated sleeve for the supply line come with each unit.
6. Simple installation - no heat well needed; use an 8-12 inch tile; can be fitted on most existing pads.
7. Sealed bottom keeps out moisture and rodents.
8. Two 2-inch drain holes for fast clean out.
9. Foam insulation between walls has an R-value of 7.14 inch.
10. Double wall DURAROCK® construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.
11. Seamless sidewall cannot leak.
12. Tolerance to water level - you don't have to worry about summer and winter water levels. (If the water level is too high on a ball or float type closure, closures can stick).
13. Dependable, non siphoning valve - proven and trouble free.
14. Animal friendly insulated flaps. Livestock can drink out of both flaps at the same time - not always so with a ball closure. No pulleys and cables to foul and rust.

Used on models: WPM10/WPM10A/WPM14/WPM14A/WPM16/WPM20/WPM80 and WPM120 To assist in heating if animal number is low. Provides the ability to go energy free in the future as more animals are added.

This part is the full assembly for part WPM103.

Replacement valve, float arm, valve attachment & float for WPM 10, 10A, 14, 14A, 16, 20, 80 drinker.

WPM20 VALVE, 3/4 POLY BASE, 1/4 ORIFICE

Replacement Flap for Polar Max Drinkers with no lip guard. Specify in the notes which Polar-Max drinker you have.

Includes all floats, valves and riser for WPM10 drinker. Order this if you are missing all the parts from the water inlet on.

Replacement Hinge Rod f/WPM20 Drinker

WPM20 Replacement FLOAT